Fast cooling speed / stable performance / low energy consumption / long life
制造 Specializing in the manufacture of temperature control equipment
15062688501 (same number on WeChat)
Service Hotline: 0512-57781659
Company Address: No. 299 Youbi Road, Kunshan City, Jiangsu Province
Company phone: 0512-57781659
Company Fax: 0512-57781259
Company email: firstname.lastname@example.org
Release time: 2019-06-24 14:30:50
The application of industrial chiller has entered thousands of industrial fields and factories. As a commonly used auxiliary equipment, the chiller's mission is to protect the main equipment, improve product quality and accelerate the molding offline, so the stability of the chiller is very Very important, this is not only related to the quality and qualification rate of a mainframe device or a product, but also the guarantee of efficient operation of a factory or production line.
Since the stable operation of the chiller is so important, what aspects need to be used to ensure that the chiller works stably and efficiently in the cooling process?
First of all, when buying a chiller, the selection is a very important part. The calculation of the cooling power should be in line with the cooling requirements of the main equipment or the main product during the selection. Increase the cooling power by 10-20% when the cooling is guaranteed. When the compressor is overloaded for hours, the chiller cannot run stably for a long time. In addition, the configuration of the cooling cycle system cannot be ignored, and the configuration of the pump flow and head should be adapted to the cooling needs.
Secondly, in the daily startup operation, pay attention to whether the voltage is stable. Whether it is the chiller compressor motor or other motors, the allowable voltage fluctuation is 10%. When the voltage fluctuation is too large, the startup cannot be started. Another point is the temperature setting. Try to keep it higher than the operating temperature to avoid frequent start of the chiller compressor.
Finally, daily maintenance is also very necessary. When we return to the user daily, many users will not perform daily maintenance. This habit is very bad. For example, air-cooled chiller, the daily maintenance is very simple, just use an air gun to clean the fin condenser, replace the cooling water, clean the filter and check the circuit electrical appliances.
The daily maintenance is done well, the chiller operation will be more stable and efficient, and the service life of the unit will be greatly improved.